Jurnal Teknik Sipil LATERAL

PERENCANAAN PENINGKATAN KUALITAS PERMUKIMAN DI KECAMATAN ILIR BARAT DUA KOTA PALEMBANG

Deven Hanyaken — 2025-12-11

Better basic public service infrastructure is needed for the growth of the housing and settlement sector. Housing infrastructure is needed along with the growth of an area. Infrastructure that functions as a center of citizen activity plays an important role in improving the urban environment. Palembang City is one of the metropolitan cities that also has problems with the quality of settlements, namely slum areas. In this study, a study was conducted on improving the quality of settlements in slum areas in Ilir Barat Dua District which focused on the areas of Tiga-puluh Ilir Village and Tiga-puluh-dua Ilir Village. The research method used was literature study, field study conducting data inventory with direct observation and stages of preparing a settlement quality improvement plan in accordance with regional spatial planning. The results of the slum indicators obtained that the waste management system, drainage system and environmental roads were the highest factors with values of 86%, 66% and 30% for Tiga-puluh Ilir Village, respectively. Meanwhile, for Kelurahan Tiga-puluh-dua Ilir also obtained the largest slum indicators, namely the waste management system of 81%, the quality of the environmental road surface of 70% and the availability of drainage of 51%. Seeing these results, the main focus of planning to improve the quality of settlements is on drainage channels and road access.

MITIGASI BENCANA TANAH LONGSOR DI DESA TANAH ABANG UTARA KECAMATAN TANAH ABANG KABUPATEN PALI

Ahmad Hidayat — 2025-12-11

Landslides are natural disasters caused by slope instability resulting from geomorphological, hydrological, and human activity factors. This phenomenon can occur suddenly or gradually, causing significant impacts on infrastructure, safety, and community access. In North Tanah Abang Village, Tanah Abang District, PALI Regency, the landslide risk is quite high due to steep topography, erosion of the Lematang River, and human activities such as deforestation and sand mining. Risk analysis through parameters such as geology, topography, rainfall, and land use indicates a moderate to high danger level in this area. Effective mitigation efforts include structural approaches like terracing and retaining walls, as well as non-structural approaches such as reforestation, community education, and land use regulation. The implementation of early warning systems is also a crucial step in reducing the impacts and losses caused by landslides. Through these measures, it is expected that the landslide disaster risk in this region can be minimized and community preparedness improved.

DESAIN PERKERASAN KAKU DENGAN METODE MANUAL PERKERASAN JALAN (REVISI JUNI 2017) DI DESA MUARA IKAN – TALANG ALI KABUPATEN PALI

Sudirman — 2025-12-11

Roads, as an essential part of the national transportation system, play a very vital role, especially in supporting economic, social, cultural, and environmental aspects. In road maintenance planning, it is necessary to have a well-organized and systematic road handling program. One of the steps in planning new roads is to determine the pavement thickness. The aim of this research is to determine the pavement thickness of roads in Muara Ikan Village - Talang Ali, PALI Regency, using the 2017 Manual for Pavement Design (MDP) method. By utilizing various methods and approaches related to traffic volume, vehicle types, subgrade soil types, and planning duration, pavement thickness calculations can be performed. The research method includes surveys of the geometric conditions of the road, daily traffic volume, and surrounding topography. The data obtained are further analyzed using the pavement design guidelines from 2017. The results indicate that the rigid pavement design based on the 2017 MDP method uses concrete pavement with a compressive strength of Fs’ 45 MPa and a thickness of 27.5 cm, an aggregate base layer of Class A with a thickness of 15 cm, and soil improvement using selective backfill with a thickness of 30 cm.

ANALISIS PERENCANAAN KRIB (PEMECAH ARUS) SEBAGAI PENGAMAN JEMBATAN RANGKA BAJA MENGGUNAKAN PEMODELAN SMS (SURFACE WATER MODELING SYSTEM) (STUDI KASUS : PENGAMAN JEMBATAN AIR ENIM 3 KABUPATEN MUARA ENIM)

Aprisandie Aprisandie — 2025-12-12

Current Breaker Structure (Crib) is one of the water building constructions that can overcome the problem of river bank damage, which is caused by river flow experiencing a high increase in flood discharge. Adjustment of the type of grib construction used certainly refers to the location of the grib placement so that it can have a real impact in overcoming the destructive power of river water when there is an increase in flood discharge volume. The purpose of this study is to analyze the planned type of current breaker structure (grib) at the location of the Enim 3 Steel Frame Bridge using the SMS (Surface Modeling System) Modeling method that can provide information on water flow in the watershed. This research method is in the form of research by conducting various mathematical and empirical approaches, so that the type of grib that is appropriate to field conditions (soil, river flow, and facilities around the river) will be obtained which will ultimately produce Design Details that can be followed up with construction activities. From the results of the grib planning calculations, 4 grib units with a hexapod type are obtained which are arranged in a trapezoidal shape.

ANALISIS BEBAN GEMPA PADA GEDUNG RUMAH SAKIT MENGGUNAKAN METODE STATIK DAN DINAMIK

M. Rifano Anggara — 2025-12-12

RSUD Siti Fatimah Az-Zahra in the province of South Sumatra is the largest regional government hospital in Indonesia. The hospital functions not only as a place of medical care, but also as a complex health service center, which requires a special and well-integrated building structure design. Analysis of the building structure using static equivalent force analysis and dynamic response spectrum analysis methods within the framework of the upper structure with a focus on comparing displacement and base shear. The purpose of this study is to determine the results of displacement and base shear, and to determine the results of comparison of displacement and base shear results using equivalent static and dynamic response spectrum methods. The results of the research conducted using SAP2000 software calculated the displacement that occurred using the equivalent static method shifted by 1.08% in the X direction and by 3.97% in the Y direction, then using the dynamic spectrum response method shifted by 1.41% in the X direction and by 3.56% in the Y direction, while the base shear for the resulting scale factor in the X direction was 1.412 and for the Y direction was 1.119. The displacement comparison results for the equivalent static method in the X direction are smaller than those for the dynamic spectrum response method in the X direction, and for the equivalent static method in the Y direction are larger than those for the dynamic spectrum response method in the Y direction, while for the base shear calculation, the equivalent static method is larger than that for the dynamic spectrum response method, based on the SNI-1726-2019 reference calculated using SAP2000 software, the structure is still in the SAFE category.

ANALISIS PRODUKTIVITAS ALAT BERAT PADA PEKERJAAN TANAH PROYEK NORMALISASI DANAU DI DANAU ULAK LIA KECAMATAN SEKAYU

Verinazul Septriansyah — 2025-12-12

Lake Normalization is a job that aims to improve the structure of the lake shape by moving sedimentation in the lake so that the lake volume increases and can accommodate more water capacity. Lake normalization work uses excavator heavy equipment with hitachi and sumitomo brands. The purpose of this study is to determine the productivity of excavator heavy equipment using the analysis method of PERMEN PUPR No. 28/PRT/M/2016 and determine the number of heavy equipment needed in lake normalization work. Based on the results of the analysis that has been done, it is known that the volume of the lake is 98,350 m³ with hourly productivity of hitachi brand heavy equipment 93.72 m³ / hour and productivity of sumitomo brand heavy equipment 84.35 m³ / hour and the heavy equipment needed in lake normalization work is 10 units consisting of 5 units of hitachi brand excavators and 5 units of sumitomo brand excavators.

ANALISIS VOLUME TIMBUNAN SEDIMEN KOLAM RETENSI RUMAH SAKIT ISLAM SITI KHADIJAH PALEMBANG

Reni Andayani — 2025-12-12

Palembang City, especially the Demang Lebar Daun Sub-district area which every year during the rainy season always experiences flooding caused by the topography in the form of lowlands so that during the rainy season it receives a large amount of water flow. The retention pond of the Siti Khadijah Hospital on Jalan Demang Lebar Daun is a retention pond that is able to accommodate excess water in the area, but this pond is no longer able to overcome the problem of flooding, one of the causes being the capacity of the existing retention pond that is not appropriate and the problem of sedimentation deposits. The research method used was a measurement survey to obtain data on the cross-sectional area and depth of the pond, in addition to taking sediment samples at the inlet, outlet and middle of the pond to carry out filter analysis and specific gravity in the laboratory. The results of the study showed that based on sediment analysis using the Frijlink method, the largest basic sediment discharge was 5.192 x 10^-6 m³/s/m, the basic sediment volume (bed load) was 3.7832 x 10^-6m³/s and the largest retention pond embankment volume was 25,788.25 m³/year.

STUDI PENGGUNAAN AGREGAT HALUS PASIR DAN AGREGAT KERIKIL ALAM SUNGAI BATANGHARI TERHADAP KUAT TEKAN BETON

Putri Della Safera — 2025-12-26

Concrete is a widely used construction material due to its high strength and durability. The quality of concrete is greatly influenced by the characteristics of the aggregates that make up 60–70% of the concrete volume. This study aims to analyze the effect of fine sand aggregate and coarse natural gravel aggregate from the Batanghari River on the compressive strength of concrete. Three sample variations were used, namely: AA (Mendapo Quarry and Kasang Quarry aggregates), BB (RBE Quarry and Sengeti Quarry aggregates), and AABB (a combination of AA + BB). The test specimens were cylindrical in shape, measuring 15×30 cm with a design quality of 20 MPa. Compressive strength testing was carried out at the ages of 7, 14, and 28 days according to SNI 1974:2011. The test results at 7 days of age were 5.436 MPa for AA samples, 5.067 MPa for BB samples, 5.879 MPa for AABB samples, at 14 days of age 16.080 MPa for AA samples, 13.389 MPa for BB samples, 14.829 MPa for AABB samples and at 28 days of age 20.907 MPa for AA samples, 17.403 MPa for BB samples and 22.036 MPa for AABB samples which produced the highest compressive strength. The combination of aggregates provides better gradation, low porosity, and higher density. The natural aggregates of Batanghari River are proven to be suitable for use in medium quality concrete.

ANALISIS PENGARUH PENCAMPURAN SEMEN PADA TANAH GAMBUT KUTARAYA TERHADAP NILAI CBR

Siti Muslikah — 2026-01-06

Peat soil is a soil that physically and technically does not meet the requirements and conditions in construction work. This study aims to evaluate the improvement of soil carrying capacity using cement stabilization methods, focusing on the value of California Bearing Ratio (CBR) unsoaked. Tests are carried out in laboratories to analyze the physical and mechanical properties of the soil. This research is intended to address the significant subsidence problem that can occur in road construction built on peat soil. The results showed that the CBR value of native soil was 3.00%. After the addition of 4% cement, the CBR value increases to 3.25%. At the addition of 6% cement, the CBR value fell to 2.50%, while at the addition of 8% cement, the CBR value reached 4.17%. It can be concluded that the greatest increase in the value of CBR occurs in the addition of 8% of cement. Thus, soil stabilization methods using cement mixtures can increase the CBR value of peat soils.

PEMODELAN GREENSHIELD TERHADAP HAMBATAN SAMPING PADA RUAS JALAN MP MANGKUNEGARA KOTA PALEMBANG

Yules Pramona Zulkarnain — 2026-01-17

This study aims to analyze the impact of side friction on traffic performance along MP Mangkunegara Street, Palembang City, using the PKJI 2023 method and the Greenshields model. Observed side friction factors include parked/stopped vehicles, pedestrians, entering/exiting vehicles, and street vendors, with a very high intensity reaching 811.8 events/hour on Saturday and 890.4 events/hour on Tuesday. These conditions contribute to a significant reduction in free-flow speed and road capacity. Based on the Greenshields model analysis, the free-flow speed (Vf) decreased significantly from 38.833 km/h to 26.028 km/h, while the jam density (Dj) increased from 69.90 smp/km to 158.128 smp/km. Although the maximum flow (Qmax) increased due to rising density, the speed at maximum capacity declined. The peak-hour degree of saturation ranged from 0.44 to 0.78, indicating a level of service between B and D.